All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ high density polyethylene pellets ] match 56 products.
Hiden M830 Yuhwa Korea
| Density: | 0.962 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.8 G/10 Min |
| Rockwell Hardness (R-Scale): | 54 |
Braskem Green PE STS7006 LDPE Pellets Bio Based Polyethylene Granules 0.925 G/Cm3
| Density (23°C): | 0.925 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.6 G/10 Min |
| Molding Temperature: | 170 -190 °C |
VIDEO
Lightweight PE Polyethylene Particles Low Temperature Heat Sealing Extrusion Grade
| MFR: | 1.5 G/10 Min |
|---|---|
| Durometer Hardness: | 95A |
| Vicat Softening Temperature: | 108 °C |
Enable™ 3505MC Exxonmobil Metallocene Polyethylene
| Density / Specific Gravity: | 0.935 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) 190°C/2.16 Kg: | 0.50 G/10 Min |
| Durometer Hardness (Shore D, 15 Sec): | 50 |
Talsox® 8001 Formosa Plastics Hdpe
| Density: | 0.948 G/cm3 |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg) 0.05 G/10 Min: | 0.05 G/10 Min |
| Manufacturer: | Taiwan Formosa Plastics |
Alathon H6030 LyondellBasell HDPE
| Density (23°C): | 0.965 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 30 G/10 Min |
| Notched Izod Impact (23°C): | 21 J/m |
HI-ZEX™ 7000f Prime Polymer
| Density: | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.04 G/10 Min |
| Shore Hardness （D): | 64 |
Hdpe Hi-Zex™ 5100e Prime Polymer
| Density: | 0.958 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.98 G/10 Min |
| Packaging Details: | 25 tons in 40-foot container |
Evolue™ Sp0540 Prime Polymer Mlldpe
| Melt Mass-Flow Rate (MFR): | 3.8 G/10 Min |
|---|---|
| Density: | 0.903 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 49 |
Hiden B502 Yuhwa Korea
| Density: | 0.958 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.28 G/10 Min |
| Rockwell Hardness (R-Scale): | 51 |