All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ high density polyethylene pellets ] match 56 products.
Hiden® M850 Yuhwa Korea
| Density: | 0.965 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 4.7 G/10 Min |
| Rockwell Hardness (R-Scale): | 56 |
Hiden B500 Yuhwa Korea
| Density: | 0.958 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.2 G/10 Min |
| Rockwell Hardness (R-Scale): | 50 |
Novatec Hdpe Hy430 Japan Polychem Corporation
| Density: | 0.956 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1.1 G/10 Min |
| Shore Hardness （D): | 67 |
Novatec® HD HJ580N apan Polychem
| Density: | 0.964 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 7 G/10 Min |
| Shore Hardness （D): | 65 |
Novatec® HD HY531 Japan Polychem
| Density: | 0.958 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.60 G/10 Min |
| Shore Hardness （D): | 69 |
Lupolen 2427F LyondellBasell LDPE
| Processing Temperature: | 160-200°C |
|---|---|
| Melt Index: | 4 G/10 Min |
| Shore Hardness (Shore D): | 42D |
Lupolen 2420F LyondellBasell LDPE
| Processing Temperature: | 160-200°C |
|---|---|
| Melt Index: | 0.75 G/10 Min |
| Applications: | Film, Injection Molding, Coating |
Enable™ 3305mq Exxonmobil Mlldpe
| Density / Specific Gravity: | 0.933 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) 190°C/2.16 Kg: | 0.50 G/10 Min |
| Durometer Hardness (Shore D, 15 Sec): | 50 |
Prime Polymer Evolue PE SP3530 Cast Film
| Melt Mass-Flow Rate (MFR): | 3.2 G/10 Min |
|---|---|
| Density: | 0.930 G/cm³ |
| Processing Method: | Cast Film |
Prime Polymer Evolue PE SP1071C Extrusion
| Melt Mass-Flow Rate (MFR): | 10 G/10 Min |
|---|---|
| Density: | 0.910 G/cm³ |
| Processing Method: | Extrusion |