All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ high density polyethylene pellets ] match 56 products.
Purell PE GF4750 LyondellBasell HDPE
| Density (23°C): | 0.950 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.4 G/10 Min |
| Processing Method: | Extrusion Blow Molding |
Petrothene LR734001 LyondellBasell HDPE
| Density (23°C): | 0.953 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.38 G/10 Min |
| Processing Method: | Extrusion Blow Molding |
VIDEO
Purell Acp 5231d Lyondellbasell HDPE
| Density (23°C): | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.3 G/10 Min |
| Processing Method: | Injection Blow Molding |
Purell ACP 6541A LyondellBasell HDPE
| Density (23°C): | 0.954 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1.5 G/10 Min |
| Processing Method: | Injection Molding |
Icorene N2805-1000 Nat Lyondellbasell Hdpe
| Density (23°C): | 0.954 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 20 G/10 Min |
| Processing Method: | Injection Molding |
Talsox® 9001 Formosa Plastics Hdpe
| Thermal Conductivity: | 0.45 W/m·K |
|---|---|
| Flexural Modulus: | 1,000 MPa |
| Recyclability: | 100% |
VIDEO
High Strength Polyethylene Film Solutions For Highly Transparent Vacuum Storage Bags
| MFR: | 4g/10 Min |
|---|---|
| Durometer Hardness: | 74A |
| Vicat Softening Temperature: | 85 °C |
VIDEO
Toughened Grade Polyethylene Pellets High Flow Plastic Flower Raw Material
| MFR: | 55 G/10 Min |
|---|---|
| Durometer Hardness: | 90A |
| Vicat Softening Temperature: | 90 °C |
Purell Gb7260 Lyondellbasell Hdpe
| Density (23°C): | 0.96 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 8 G/10 Min |
| Processing Method: | Injection Molding |
Hiden M690 Yuhwa Korea
| Density: | 0.962 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 12 G/10 Min |
| Rockwell Hardness (R-Scale): | 51 |