All Products
Contact Person :
lei
Phone Number :
13266828705
Prime Polymer Evolue Sp2020 Lldpe Blown Film
| Melt Mass-Flow Rate (MFR): | 2.3 G/10 Min |
|---|---|
| Density: | 0.916 G/cm³ |
| Processing Method: | Blown Film |
Prime Polymer Evolue Sp1510 Lldpe, Blown Film
| Melt Mass-Flow Rate (MFR): | 1.0 G/10 Min |
|---|---|
| Density: | 0.915 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 55 |
Prime Polymer Evolue PE SP4020 Blown Film
| Melt Mass-Flow Rate (MFR): | 1.8 G/10 Min |
|---|---|
| Density: | 0.937 G/cm³ |
| Processing Method: | Blown Film |
Prime Polymer Evolue PE SP2520 Blown Film
| Melt Mass-Flow Rate (MFR): | 1.9 G/10 Min |
|---|---|
| Density: | 0.925 G/cm³ |
| Processing Method: | Blown Film |
Prime Polymer Evolue PE SP2320 Blown Film
| Melt Mass-Flow Rate (MFR): | 1.9 G/10 Min |
|---|---|
| Density: | 0.92 G/cm³ |
| Processing Method: | Blown Film |
Prime Polymer Evolue Sp1520 Blown Film
| Melt Mass-Flow Rate (MFR): | 2 G/10 Min |
|---|---|
| Density: | 0.919 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 54 |
Prime Polymer Evolue Sp0510 Lldpe Blown Film
| Melt Mass-Flow Rate (MFR): | 1.2 G/10 Min |
|---|---|
| Density: | 0.903 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 50 |
Petrothene® GA502023 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2 G/10 Min |
| Processing Method: | Blown Film Cast Film Film Extrusion |
Evolue™ SP2540 Prime Polymer Metallocene
| Melt Mass-Flow Rate (MFR): | 3.8 G/10 Min |
|---|---|
| Density: | 0.924 G/cm³ |
| Processing Method: | Cast Film |
Evolue™ Sp0540 Prime Polymer Mlldpe
| Melt Mass-Flow Rate (MFR): | 3.8 G/10 Min |
|---|---|
| Density: | 0.903 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 49 |