All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ extrusion polyethylene granules ] match 48 products.
VIDEO
Extrusion Grade Polyethylene Granules Cold Resistant Anti Explosion For Corrugated Pipes
| Color: | Transparent |
|---|---|
| Application: | Packaging |
| Surface Finish: | Glossy |
LDPE Low Density Polyethylene Granules Braskem Green PE STN7006 Polyethylene Granules
| Density (23°C): | 0.924 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.6 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Bio Based Sugarcane LLDPE Linear Low Density Polyethylene Granules Braskem LH0820/30AF
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.8 G/10 Min |
| Processing Method: | Blown Film ,Film Extrusion |
Bio Based Sugarcane LLDPE Polyethylene Granules Braskem Green PE SLL118/21
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film ,Film Extrusion |
Bio Based Sugarcane LDPE Polyethylene Granules Green PE Braskem SBB0323
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.32 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE SLH118/21 LLDPE Material Bio Based Sugarcane Polyethylene Granules
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film Extrusion. |
Biobased LDPE Particles Polyethylene Granules Braskem Green PE SBC818
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 8.3 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE SPB681/59 Bio Based Polyethylene Granules LDPE Sugarcane Material
| Density (23°C): | 0.922 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.8 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE SLL118 Bio Based Sugarcane Polyethylene LLDPE Plastic Granules
| Density (23°C): | 0.916 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film Extrusion. |
Petrothene® NA205000 LyondellBasell LDPE
| Density: | 0.918 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (190°C/2.16 Kg): | 16 G/10 Min |
| Processing Methods: | Extrusion, Blown Film |