All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ extrusion polyethylene granules ] match 48 products.
Novatec® HD HE121 Japan Polychem
| Density: | 0.938 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.20 G/10 Min |
| Shore Hardness （D): | 64 |
Purell 3020d LyondellBasell LDPE
| Impact Strength: | No Break |
|---|---|
| Flexural Modulus: | 200 MPa |
| Tensile Strength: | 17 MPa |
Braskem Green PE Seb853 LDPE Particles High Pressure Bio Based Sugarcane Material
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.7 G/10 Min |
| Molding Temperature: | 170 -190 °C |
VIDEO
Petrothene Lr734002 Lyondellbasell Hdpe
| Density (23°C): | 0.954 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.35 G/10 Min |
| Processing Method: | Extrusion Blow Molding |
Talsox® 8001 Formosa Plastics Hdpe
| Density: | 0.948 G/cm3 |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg) 0.05 G/10 Min: | 0.05 G/10 Min |
| Manufacturer: | Taiwan Formosa Plastics |
Petrothene® NA480145 LyondellBasell LDPE
| Density: | 0.923 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (190°C/2.16 Kg): | 0.25 G/10 Min |
| Processing Methods: | Extrusion, Blown Film |
Petrothene® NA480178 LyondellBasell LDPE
| Density: | 0.923 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (190°C/2.16 Kg): | 0.25 G/10 Min |
| Processing Methods: | Extrusion, Blown Film |
Petrothene® NA442051 LyondellBasell LDPE
| Density: | 0.923 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (190°C/2.16 Kg): | 1.5 G/10 Min |
| Processing Methods: | Extrusion, Blown Film |