All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ extrusion polyethylene granules ] match 48 products.
Bio Based Sugarcane Polyethylene LLDPE Granules Braskem Green PE SLH218
| Density (23°C): | 0.916 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.3 G/10 Min |
| Processing Method: | Blown Film Extrusion. |
Polyethylene LLDPE Granules Bio Based Sugarcane Braskem Green PE SLL318
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.7 G/10 Min |
| Molding Temperature: | 170 -180 °C |
Petrothene® NA149000 LyondellBasell LDPE
| Density: | 0.919 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (190°C/2.16 Kg): | 4 G/10 Min |
| Processing Methods: | Extrusion, Blown Film |
Talsox® 8010 Formosa Plastics Hdpe
| Density: | 0.956 G/cm3 |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg) 0.05 G/10 Min: | 1 G/10 Min |
| Manufacturer: | Taiwan Formosa Plastics |
Petrothene® NA206000 LyondellBasell LDPE
| Density: | 0.918 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (190°C/2.16 Kg): | 14 G/10 Min |
| Processing Methods: | Extrusion, Blown Film |
Polyethylene LDPE Plastic Pellets Sugarcane Material Green PE Braskem SPB681
| Density (23°C): | 0.922 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.8 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE STS7006 LDPE Pellets Bio Based Polyethylene Granules 0.925 G/Cm3
| Density (23°C): | 0.925 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.6 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Petrothene® Na204000 Lyondellbasell LDPE
| Density: | 0.918 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (190°C/2.16 Kg): | 7 G/10 Min |
| Processing Methods: | Extrusion, Blown Film |
Petrothene® Na209009 Lyondellbasell Ldpe
| Density: | 0.925 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (190°C/2.16 Kg): | 23 G/10 Min |
| Processing Methods: | Extrusion, Blown Film |
Green PE Braskem SBF0323/12HC Bio Based Polyethylene Granules LDPE Sugarcane Material
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.32 G/10 Min |
| Molding Temperature: | 170 -190 °C |