All Products
Contact Person :
lei
Phone Number :
13266828705
Petrothene GA502022 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2 G/10 Min |
| Processing Method: | Blown Film Cast Film Film Extrusion |
Petrothene® Ga50224 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2 G/10 Min |
| Processing Method: | Blown Film Cast Film Film Extrusion |
Microthene MP564189 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 20 G/10 Min |
| Processing Method: | Injection Molding |
Icorene 2551 Lyondellbasell LLDPE
| Density (23°C): | 0.925 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 5 G/10 Min |
| Processing Method: | Rotational Molding |
Prime Polymer Evolue Sp2510 Blown Film Lldpe
| Melt Mass-Flow Rate (MFR): | 1.5 G/10 Min |
|---|---|
| Density: | 0.923 G/cm³ |
| Processing Method: | Blown Film |
Prime Polymer Evolue PE SP1071C Extrusion
| Melt Mass-Flow Rate (MFR): | 10 G/10 Min |
|---|---|
| Density: | 0.910 G/cm³ |
| Processing Method: | Extrusion |
Bio Based Polyethylene Sugarcane LLDPE Granules Braskem Green PE SLH118
| Density (23°C): | 0.916 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film Extrusion. |
Prime Polymer Evolue PE SP3530 Cast Film
| Melt Mass-Flow Rate (MFR): | 3.2 G/10 Min |
|---|---|
| Density: | 0.930 G/cm³ |
| Processing Method: | Cast Film |
Prime Polymer Evolue PE SP4030 Cast Film
| Melt Mass-Flow Rate (MFR): | 3.8 G/10 Min |
|---|---|
| Density: | 0.938 G/cm³ |
| Processing Method: | Cast Film |
Braskem Green PE SLH118/21 LLDPE Material Bio Based Sugarcane Polyethylene Granules
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film Extrusion. |