All Products
Contact Person :
lei
Phone Number :
13266828705
LLDPE Film Extrusion Linear Low Density Polyethylene Pellets Petrothene GA501
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Film Extrusion |
Prime Polymer Evolue Sp3010 Blown Film
| Melt Mass-Flow Rate (MFR): | 0.8 G/10 Min |
|---|---|
| Density: | 0.926 G/cm³ |
| Processing Method: | Blown Film |
Prime Polymer Evolue Sp2120
| Melt Mass-Flow Rate (MFR): | 2.2 G/10 Min |
|---|---|
| Density: | 0.921 G/cm³ |
| Processing Method: | Blown Film |
Polyethylene LLDPE Granules Bio Based Sugarcane Braskem Green PE SLL318
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.7 G/10 Min |
| Molding Temperature: | 170 -180 °C |
Bio Based Sugarcane LLDPE Polyethylene Granules Braskem Green PE SLL118/21
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film ,Film Extrusion |
Braskem Green PE SLL118 Bio Based Sugarcane Polyethylene LLDPE Plastic Granules
| Density (23°C): | 0.916 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film Extrusion. |
Bio Based Sugarcane Polyethylene LLDPE Granules Braskem Green PE SLH218
| Density (23°C): | 0.916 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.3 G/10 Min |
| Processing Method: | Blown Film Extrusion. |
Prime Polymer Evolue SP2040 Cast Film Mlldpe
| Melt Mass-Flow Rate (MFR): | 3.8 G/10 Min |
|---|---|
| Density: | 0.918 G/cm³ |
| Processing Method: | Cast Film |
Prime Polymer Evolue SP1540 Cast Film Mlldpe
| Melt Mass-Flow Rate (MFR): | 3.8 G/10 Min |
|---|---|
| Density: | 0.913 G/cm³ |
| Processing Method: | Cast Film |
Bio Based Sugarcane LLDPE Linear Low Density Polyethylene Granules Braskem LH0820/30AF
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.8 G/10 Min |
| Processing Method: | Blown Film ,Film Extrusion |