All Products
Contact Person :
lei
Phone Number :
13266828705
Talsox® 8010 Formosa Plastics Hdpe
| Density: | 0.956 G/cm3 |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg) 0.05 G/10 Min: | 1 G/10 Min |
| Manufacturer: | Taiwan Formosa Plastics |
Bio Based Sugarcane LLDPE Linear Low Density Polyethylene Granules Braskem LH0820/30AF
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.8 G/10 Min |
| Processing Method: | Blown Film ,Film Extrusion |
Prime Polymer Evolue SP1540 Cast Film Mlldpe
| Melt Mass-Flow Rate (MFR): | 3.8 G/10 Min |
|---|---|
| Density: | 0.913 G/cm³ |
| Processing Method: | Cast Film |
Talsox® 9003 Formosa Plastics Hdpe
| Density: | 0.952 G/cm3 |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg) 0.05 G/10 Min: | 0.25 G/10 Min |
| Manufacturer: | Taiwan Formosa Plastics |
Talsox® 9001 Formosa Plastics Hdpe
| Thermal Conductivity: | 0.45 W/m·K |
|---|---|
| Flexural Modulus: | 1,000 MPa |
| Recyclability: | 100% |
Lupolen 5261z Lyondellbasell Hdpe
| Density (23°C): | 0.954 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.2 G/10 Min |
| Processing Method: | Extrusion Blow Molding |
Purell ACP 6541A LyondellBasell HDPE
| Density (23°C): | 0.954 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1.5 G/10 Min |
| Processing Method: | Injection Molding |
Icorene N2805-1000 Nat Lyondellbasell Hdpe
| Density (23°C): | 0.954 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 20 G/10 Min |
| Processing Method: | Injection Molding |
Purell Gb7260 Lyondellbasell Hdpe
| Density (23°C): | 0.96 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 8 G/10 Min |
| Processing Method: | Injection Molding |
Purell Gb 7250 Lyondellbasell Hdpe
| Density (23°C): | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 10 G/10 Min |
| Processing Method: | Injection Molding |