All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ polyethylene metallocene granules ] match 16 products.
Exxonmobil Exceed 2012ma MLLDPE
| Density / Specific Gravity: | 0.912 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) 190°C/2.16 Kg: | 2 G/10 Min |
| Durometer Hardness (Shore D, 15 Sec): | 45 |
Enable™ 9365RT ExxonMobil
| Density / Specific Gravity: | 0.935 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) 190°C/2.16 Kg: | 0.50 G/10 Min |
| Durometer Hardness (Shore D, 15 Sec): | 54 |
Enable™ 3305mq Exxonmobil Mlldpe
| Density / Specific Gravity: | 0.933 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) 190°C/2.16 Kg: | 0.50 G/10 Min |
| Durometer Hardness (Shore D, 15 Sec): | 50 |
Prime Polymer Evolue Sp1520 Blown Film
| Melt Mass-Flow Rate (MFR): | 2 G/10 Min |
|---|---|
| Density: | 0.919 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 54 |
Prime Polymer Evolue Sp0510 Lldpe Blown Film
| Melt Mass-Flow Rate (MFR): | 1.2 G/10 Min |
|---|---|
| Density: | 0.903 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 50 |
Prime Polymer Evolue Sp1510 Lldpe, Blown Film
| Melt Mass-Flow Rate (MFR): | 1.0 G/10 Min |
|---|---|
| Density: | 0.915 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 55 |