All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ polyethylene green pe material ] match 18 products.
Polyethylene Green PE Material Braskem SGF4950 Bio Based Plastic Sugarcane
| Density (23°C): | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.4 G/10 Min |
| Notched Izod Impact (23°C): | 20 J/m |
Green PE Material Braskem SHC7260 Bio Based Plastic HDPE Polyethylene Granules
| Density (23°C): | 0.959 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 7.2 G/10 Min |
| Notched Izod Impact (23°C): | 20 J/m |
Braskem Green PE SPB681/59 Bio Based Polyethylene Granules LDPE Sugarcane Material
| Density (23°C): | 0.922 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.8 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE SGM9450F HDPE Particles Polyethylene Sugarcane Injection Grade
| Density (23°C): | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.33 G/10 Min |
| Notched Izod Impact (23°C): | 20 J/m |
LDPE Low Density Polyethylene Granules Braskem Green PE STN7006 Polyethylene Granules
| Density (23°C): | 0.924 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.6 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE SLH118/21 LLDPE Material Bio Based Sugarcane Polyethylene Granules
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film Extrusion. |
Polyethylene LDPE Plastic Pellets Sugarcane Material Green PE Braskem SPB681
| Density (23°C): | 0.922 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.8 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Biobased LDPE Particles Polyethylene Granules Braskem Green PE SBC818
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 8.3 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE SPB208 Bio Based Polyethylene LDPE Plastic Granules Sugarcane Material
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 22 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Bio Based LDPE Particles Polyethylene Sugarcane Material Braskem Green PE SPB608
| Density (23°C): | 0.915 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 30 G/10 Min |
| Molding Temperature: | 170 -190 °C |