All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ low density polyethylene pellet blown film ] match 22 products.
Lupolen 2427H LyondellBasell LDPE
| Processing Temperature: | 160-200°C |
|---|---|
| Melt Index: | 1.9 G/10 Min |
| Shore Hardness (Shore D): | 42D |
HI-ZEX™ 3300f Prime Polymer
| Density: | 0.95 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1.1 G/10 Min |
| Shore Hardness （D): | 62 |
HI-ZEX™ 7000f Prime Polymer
| Density: | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.04 G/10 Min |
| Shore Hardness （D): | 64 |
Petrothene GA502022 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2 G/10 Min |
| Processing Method: | Blown Film Cast Film Film Extrusion |
Petrothene® GA502023 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2 G/10 Min |
| Processing Method: | Blown Film Cast Film Film Extrusion |
Petrothene® Ga50224 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2 G/10 Min |
| Processing Method: | Blown Film Cast Film Film Extrusion |
Evolue™ SP2540 Prime Polymer Metallocene
| Melt Mass-Flow Rate (MFR): | 3.8 G/10 Min |
|---|---|
| Density: | 0.924 G/cm³ |
| Processing Method: | Cast Film |
Lupolen 2420F LyondellBasell LDPE
| Processing Temperature: | 160-200°C |
|---|---|
| Melt Index: | 0.75 G/10 Min |
| Applications: | Film, Injection Molding, Coating |
Petrothene® Na209009 Lyondellbasell Ldpe
| Density: | 0.925 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (190°C/2.16 Kg): | 23 G/10 Min |
| Processing Methods: | Extrusion, Blown Film |
Hdpe Hi-Zex™ 5100e Prime Polymer
| Density: | 0.958 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.98 G/10 Min |
| Packaging Details: | 25 tons in 40-foot container |