All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ ldpe plastic granules ] match 28 products.
Braskem Green PE SPB208 Bio Based Polyethylene LDPE Plastic Granules Sugarcane Material
Density (23°C): | 0.923 G/cm³ |
---|---|
Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 22 G/10 Min |
Molding Temperature: | 170 -190 °C |
Lupolen 2421F Lyondellbasell LDPE
Tensile Strength At Yield: | 18MPa |
---|---|
Processing Temperature: | 160-200°C |
Melt Index: | 0.75g/10 Min |
Polyethylene LDPE Plastic Pellets Sugarcane Material Green PE Braskem SPB681
Density (23°C): | 0.922 G/cm³ |
---|---|
Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.8 G/10 Min |
Molding Temperature: | 170 -190 °C |
Braskem Green PE SLL118 Bio Based Sugarcane Polyethylene LLDPE Plastic Granules
Density (23°C): | 0.916 G/cm³ |
---|---|
Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
Processing Method: | Blown Film Extrusion. |
Petrothene® NA205000 LyondellBasell LDPE
Density: | 0.918 G/cm³ |
---|---|
Melt Flow Rate (MFR) (190°C/2.16 Kg): | 16 G/10 Min |
Processing Methods: | Extrusion, Blown Film |
Petrothene® NA206000 LyondellBasell LDPE
Density: | 0.918 G/cm³ |
---|---|
Melt Flow Rate (MFR) (190°C/2.16 Kg): | 14 G/10 Min |
Processing Methods: | Extrusion, Blown Film |
Petrothene® Na209009 Lyondellbasell Ldpe
Density: | 0.925 G/cm³ |
---|---|
Melt Flow Rate (MFR) (190°C/2.16 Kg): | 23 G/10 Min |
Processing Methods: | Extrusion, Blown Film |
Petrothene® Na204000 Lyondellbasell LDPE
Density: | 0.918 G/cm³ |
---|---|
Melt Flow Rate (MFR) (190°C/2.16 Kg): | 7 G/10 Min |
Processing Methods: | Extrusion, Blown Film |
Ldpe Novatec Lj920 Japan Polychem Corporation
Density: | 0.923 G/cm³ |
---|---|
Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 58 G/10 Min |
Packaging Details: | 25 tons in 40-foot container |
Ldpe Novatec LF581X Japan Polychem Corporation
Density: | 0.933 G/cm³ |
---|---|
Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 4.0 G/10 Min |
Packaging Details: | 25 tons in 40-foot container |