All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ injection gpps granules ] match 8 products.
VIDEO
1.04 G/Cm3 Density DENKA STYROL GPPS Particles Transparent Injection GPPS Granules
| Density (23°C): | 1.04 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (200°C/5.0 Kg): | 2 G/10 Min |
| UL Flame Rating: | HB |
VIDEO
Injection Grade Denka Styrol GPPS Particles Transparent GPPS Granules MF-21-321
| Density (23°C): | 1.04 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (200°C/5.0 Kg): | 4.5 G/10 Min |
| UL Flame Rating: | HB |
VIDEO
Colorless Denka Styrol GPPS Particles High Transparent Injection Moulding Granules
| Density (23°C): | 1.04 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (200°C/5.0 Kg): | 1.8 G/10 Min |
| UL Flame Rating: | HB |
VIDEO
High Transparent GPPS Plastic Granules For Injection Molding DENKA STYROL MF-21-301
| Density (23°C): | 1.04 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (200°C/5.0 Kg): | 4.5 G/10 Min |
| UL Flame Rating: | HB |
VIDEO
Extrusion GPPS Particles High Impact Polystyrene Resin Granules DENKA STYROL MW-1-301
| Heat Deflection Temperature: | 80-90°C |
|---|---|
| Flexural Strength: | 70-80 MPa |
| Melt Flow Index: | 5-10 G/10min |
VIDEO
White PPS Granules 1140L4 Enhanced High Temperature Resistant Material
| Density (23°C): | 1.65 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (200°C/5.0 Kg): | 20 G/10 Min |
| Notched Izod Impact (23°C: | 10 KJ/m² |
VIDEO
Trinseo Gpps Styron 634
| Density (23°C): | 1.04 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (200°C/5.0 Kg): | 3.5 G/10 Min |
| Notched Izod Impact (23°C: | 23 J/m |
VIDEO
Styron™ 666h Trinseo Polystyrene, General Purpose Gpps
| Density (23°C): | 1.04 G/cm³ |
|---|---|
| Melt Flow Rate (MFR) (200°C/5.0 Kg): | 8 G/10 Min |
| Notched Izod Impact (23°C: | 16 J/m |
1