All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ bio based polyethylene ] match 23 products.
Bio Based Sugarcane LLDPE Polyethylene Granules Braskem Green PE SLL118/21
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film ,Film Extrusion |
Bio Based Sugarcane LLDPE Linear Low Density Polyethylene Granules Braskem LH0820/30AF
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.8 G/10 Min |
| Processing Method: | Blown Film ,Film Extrusion |
Bio Based Sugarcane LDPE Polyethylene Granules Green PE Braskem SBB0323
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.32 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Bio Based Sugarcane Polyethylene LLDPE Granules Braskem Green PE SLH218
| Density (23°C): | 0.916 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.3 G/10 Min |
| Processing Method: | Blown Film Extrusion. |
VIDEO
Bio Based White Masterbatch Polyethylene Sugarcane Pellets Density 1.4g/Cm3
| Density: | 1.4 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film, Blow Molding, Extrusion, Injection Molding |
Bio Based Polyethylene Sugarcane LLDPE Granules Braskem Green PE SLH118
| Density (23°C): | 0.916 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Blown Film Extrusion. |
Bio Based Polyethylene LDPE Particles Sugarcane Material Braskem Green PE SEB853/72
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.7 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Polyethylene Green PE Material Braskem SGF4950 Bio Based Plastic Sugarcane
| Density (23°C): | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.4 G/10 Min |
| Notched Izod Impact (23°C): | 20 J/m |
VIDEO
Braskem SGE7252 Bio Based Plastic Sugarcane Polyethylene Hdpe Granules
| Density (23°C): | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2 G/10 Min |
| Notched Izod Impact (23°C): | 20 J/m |
LDPE Low Density Polyethylene Granules Braskem Green PE STN7006 Polyethylene Granules
| Density (23°C): | 0.924 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.6 G/10 Min |
| Molding Temperature: | 170 -190 °C |