All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ abs ] match 94 products.
VIDEO
White Black Plastic SABIC PC ABS Cycoloy C6200 Flame Retardant
| Density: | 1.18 G/cm3 |
|---|---|
| Melt Mass-Flow Rate (MFR) (260°C/2.16 Kg): | 15 G/10 Min |
| Flammability: | UL94 V-0 |
VIDEO
High Gloss ABS Plastic Black Masterbatch Injection Molding High Concentration Masterbatch
| Density: | 1.75 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 16 G/10 Min |
| Processing Method: | Injection Molding, |
VIDEO
10% Glass Fiber Reinforced PC/ABS Particles High Strength
| Density (23°C): | 1.20 G/cm³ |
|---|---|
| Melt Volume-Flow Rate (MVR) (220°C/10.0 Kg): | 18 Cm³/10min |
| Flame Rating: | HB |
VIDEO
High Rigidity 20% Glass Fiber Reinforced PC ABS Particles with Low Warpage Performance
| Density (23°C): | 1.29 G/cm³ |
|---|---|
| Melt Volume-Flow Rate (MVR) (220°C/10.0 Kg): | 23 Cm³/10min |
| Flame Rating: | HB |
VIDEO
Chemical Resistant SABIC PC ABS Cycoloy CX7110 High Flow Flame Retardant
| Density: | 1.19 G/cm3 |
|---|---|
| Melt Mass-Flow Rate (MFR) (260°C/2.16 Kg): | 22 G/10 Min |
| Flammability: | V0 |
VIDEO
Sabic LNP™ ELCRES™ CX7410 Super tough and cold resistant PC/ABS flame retardant V0
| Flammability: | V-0 |
|---|---|
| Density / Specific Gravity: | 1.2 G/Cm³ |
| Flow Rate (MVR) (260°C/2.16 Kg): | 11 Cm³/10min |
VIDEO
ABS Chimei Polylac Pa-757 High Gloss Impact Resistant ABS Particles
| Flexural Strength: | 70 MPa |
|---|---|
| Color: | White |
| Tensile Strength: | 50 MPa |
VIDEO
Nylon PA6 PC ABS Plastic Additives Laser Engraving Laser Marking Masterbatch
| Packaging Details: | 5 tons in 40-foot container |
|---|---|
| Delivery Time: | 3-8 work days |
| Payment Terms: | T/T |
VIDEO
Nylon PA6 ABS Laser Engraving Powder Black And White Laser Marking Additives
| Packaging Details: | 5 tons in 40-foot container |
|---|---|
| Delivery Time: | 3-8 work days |
| Payment Terms: | T/T |
VIDEO
Chimei Polylac PA-746H Paintable High Flow High Impact Resistance ABS Granules
| Density: | 1.05 G/cm3 |
|---|---|
| Elongation At Break: | 30% |
| Molding Temperature: | 200-230°C |