All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ polyethylene lldpe pellets ] match 7 products.
Petrothene GA502022 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2 G/10 Min |
| Processing Method: | Blown Film Cast Film Film Extrusion |
Petrothene® Ga50224 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2 G/10 Min |
| Processing Method: | Blown Film Cast Film Film Extrusion |
LLDPE Film Extrusion Linear Low Density Polyethylene Pellets Petrothene GA501
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1 G/10 Min |
| Processing Method: | Film Extrusion |
Petrothene® GA502023 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2 G/10 Min |
| Processing Method: | Blown Film Cast Film Film Extrusion |
Polyethylene LDPE Plastic Pellets Sugarcane Material Green PE Braskem SPB681
| Density (23°C): | 0.922 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.8 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Microthene MP564189 LyondellBasell LLDPE
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 20 G/10 Min |
| Processing Method: | Injection Molding |
Evolue™ Sp0540 Prime Polymer Mlldpe
| Melt Mass-Flow Rate (MFR): | 3.8 G/10 Min |
|---|---|
| Density: | 0.903 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 49 |
1