All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ pe metallocene polyethylene ] match 28 products.
Prime Polymer Evolue PE SP2520 Blown Film
| Melt Mass-Flow Rate (MFR): | 1.9 G/10 Min |
|---|---|
| Density: | 0.925 G/cm³ |
| Processing Method: | Blown Film |
Prime Polymer Evolue PE SP4020 Blown Film
| Melt Mass-Flow Rate (MFR): | 1.8 G/10 Min |
|---|---|
| Density: | 0.937 G/cm³ |
| Processing Method: | Blown Film |
Prime Polymer Evolue SP1540 Cast Film Mlldpe
| Melt Mass-Flow Rate (MFR): | 3.8 G/10 Min |
|---|---|
| Density: | 0.913 G/cm³ |
| Processing Method: | Cast Film |
Prime Polymer Evolue Sp2120
| Melt Mass-Flow Rate (MFR): | 2.2 G/10 Min |
|---|---|
| Density: | 0.921 G/cm³ |
| Processing Method: | Blown Film |
Exxonmobil Exceed 2012ma MLLDPE
| Density / Specific Gravity: | 0.912 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) 190°C/2.16 Kg: | 2 G/10 Min |
| Durometer Hardness (Shore D, 15 Sec): | 45 |
Prime Polymer Evolue Sp0510 Lldpe Blown Film
| Melt Mass-Flow Rate (MFR): | 1.2 G/10 Min |
|---|---|
| Density: | 0.903 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 50 |
Prime Polymer Evolue Sp1510 Lldpe, Blown Film
| Melt Mass-Flow Rate (MFR): | 1.0 G/10 Min |
|---|---|
| Density: | 0.915 G/cm³ |
| Durometer Hardness (Shore D, Injection Molded): | 55 |
Prime Polymer Evolue Sp2020 Lldpe Blown Film
| Melt Mass-Flow Rate (MFR): | 2.3 G/10 Min |
|---|---|
| Density: | 0.916 G/cm³ |
| Processing Method: | Blown Film |