All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ low density polyethylene ldpe pellets ] match 36 products.
Lupolen 2426h Lyondellbasell LDPE
| Tensile Strength At Yield: | 17.6 MPa |
|---|---|
| Processing Temperature: | 160-200°C |
| Melt Index: | 2 G/10 Min |
Lupolen 2421d Lyondellbasell LDPE
| Tensile Strength At Yield: | 18MPa |
|---|---|
| Processing Temperature: | 160-200°C |
| Melt Index: | 0.25g/10 Min |
Braskem Green PE STS7006 LDPE Pellets Bio Based Polyethylene Granules 0.925 G/Cm3
| Density (23°C): | 0.925 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.6 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Polyethylene LDPE Plastic Pellets Sugarcane Material Green PE Braskem SPB681
| Density (23°C): | 0.922 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.8 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Lupolen 2420d Lyondellbasell LDPE
| Tensile Strength At Yield: | 17.5 MPa |
|---|---|
| Processing Temperature: | 160-200°C |
| Melt Index: | 2 G/10 Min |
Lupolen 2427H LyondellBasell LDPE
| Processing Temperature: | 160-200°C |
|---|---|
| Melt Index: | 1.9 G/10 Min |
| Shore Hardness (Shore D): | 42D |
Ldpe Novatec LF129 Japan Polychem Corporation
| Density: | 0.922 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.3 G/10 Min |
| Packaging Details: | 25 tons in 40-foot container |
Ldpe Novatec Lf480mmd1 Japan Polychem Corporation
| Density: | 0.93 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.0 G/10 Min |
| Packaging Details: | 25 tons in 40-foot container |
Ldpe Novatec LC520 Japan Polychem Corporation
| Density: | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 8.4 G/10 Min |
| Packaging Details: | 25 tons in 40-foot container |
Lupolen 2427K LyondellBasell LDPE
| Processing Temperature: | 160-200°C |
|---|---|
| Melt Index: | 4 G/10 Min |
| Shore Hardness (Shore D): | 42D |