All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ ldpe sugarcane material ] match 11 products.
Green PE Braskem SBF0323/12HC Bio Based Polyethylene Granules LDPE Sugarcane Material
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.32 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE SPB681/59 Bio Based Polyethylene Granules LDPE Sugarcane Material
| Density (23°C): | 0.922 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.8 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Polyethylene LDPE Plastic Pellets Sugarcane Material Green PE Braskem SPB681
| Density (23°C): | 0.922 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 3.8 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE Seb853 LDPE Particles High Pressure Bio Based Sugarcane Material
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.7 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Bio Based Polyethylene LDPE Particles Sugarcane Material Braskem Green PE SEB853/72
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.7 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE SPB208 Bio Based Polyethylene LDPE Plastic Granules Sugarcane Material
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 22 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Bio Based LDPE Particles Polyethylene Sugarcane Material Braskem Green PE SPB608
| Density (23°C): | 0.915 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 30 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Biobased LDPE Particles Polyethylene Granules Braskem Green PE SBC818
| Density (23°C): | 0.918 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 8.3 G/10 Min |
| Molding Temperature: | 170 -190 °C |
Braskem Green PE STS7006 LDPE Pellets Bio Based Polyethylene Granules 0.925 G/Cm3
| Density (23°C): | 0.925 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.6 G/10 Min |
| Molding Temperature: | 170 -190 °C |
LDPE Low Density Polyethylene Granules Braskem Green PE STN7006 Polyethylene Granules
| Density (23°C): | 0.924 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.6 G/10 Min |
| Molding Temperature: | 170 -190 °C |