All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ high density polyethylene granules hdpe ] match 43 products.
Braskem Green PE SGM9450F HDPE Particles Polyethylene Sugarcane Injection Grade
| Density (23°C): | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.33 G/10 Min |
| Notched Izod Impact (23°C): | 20 J/m |
Novatec Hdpe Hy430 Japan Polychem Corporation
| Density: | 0.956 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1.1 G/10 Min |
| Shore Hardness （D): | 67 |
Hdpe Novatec Hf313 Japan Polychem Corporation
| Density: | 0.95 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.05 G/10 Min |
| Shore Hardness （D): | 67 |
Hdpe Novatec Hf111k Japan Polychem Corporation
| Density: | 0.945 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.05 G/10 Min |
| Shore Hardness （D): | 65 |
HDPE Novatec HF335 Japan Polychem Corporation
| Density: | 0.949 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.6 G/10 Min |
| Shore Hardness （D): | 70 |
Braskem Green PE Seb853 LDPE Particles High Pressure Bio Based Sugarcane Material
| Density (23°C): | 0.923 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 2.7 G/10 Min |
| Molding Temperature: | 170 -190 °C |
HI-ZEX™ 3300f Prime Polymer
| Density: | 0.95 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1.1 G/10 Min |
| Shore Hardness （D): | 62 |
HI-ZEX™ 7000f Prime Polymer
| Density: | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.04 G/10 Min |
| Shore Hardness （D): | 64 |
Hiden B502 Yuhwa Korea
| Density: | 0.958 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.28 G/10 Min |
| Rockwell Hardness (R-Scale): | 51 |
HIDEN® F600 Yuhwa Korea
| Density: | 0.957 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.035 G/10 Min |
| Rockwell Hardness (R-Scale): | 47 |