All Products
Contact Person :
lei
Phone Number :
13266828705
Keywords [ hdpe high density polyethylene pellets ] match 33 products.
Talsox® 9001 Formosa Plastics Hdpe
| Thermal Conductivity: | 0.45 W/m·K |
|---|---|
| Flexural Modulus: | 1,000 MPa |
| Recyclability: | 100% |
Petrothene LR734001 LyondellBasell HDPE
| Density (23°C): | 0.953 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.38 G/10 Min |
| Processing Method: | Extrusion Blow Molding |
Purell PE GF4750 LyondellBasell HDPE
| Density (23°C): | 0.950 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.4 G/10 Min |
| Processing Method: | Extrusion Blow Molding |
VIDEO
Purell Acp 5231d Lyondellbasell HDPE
| Density (23°C): | 0.952 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 0.3 G/10 Min |
| Processing Method: | Injection Blow Molding |
Purell ACP 6541A LyondellBasell HDPE
| Density (23°C): | 0.954 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1.5 G/10 Min |
| Processing Method: | Injection Molding |
Icorene N2805-1000 Nat Lyondellbasell Hdpe
| Density (23°C): | 0.954 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 20 G/10 Min |
| Processing Method: | Injection Molding |
Purell Gb7260 Lyondellbasell Hdpe
| Density (23°C): | 0.96 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 8 G/10 Min |
| Processing Method: | Injection Molding |
Novatec Hdpe Hy430 Japan Polychem Corporation
| Density: | 0.956 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 1.1 G/10 Min |
| Shore Hardness （D): | 67 |
Talsox® 8001 Formosa Plastics Hdpe
| Density: | 0.948 G/cm3 |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg) 0.05 G/10 Min: | 0.05 G/10 Min |
| Manufacturer: | Taiwan Formosa Plastics |
Alathon H6030 LyondellBasell HDPE
| Density (23°C): | 0.965 G/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 Kg): | 30 G/10 Min |
| Notched Izod Impact (23°C): | 21 J/m |